Wimberley AP-555 Replacement Foot for Select Nikon Telephoto Lenses

• UPC:
  753182834559

General

• Brand
  Wimberley
• Type
  Replacement Lens foot
• Compatibility
  Nikon 400 f/2.8 E FL, Nikon 600 f/4 E FL, Nikon 800 f/5.6 E FL
• Overview
  <strong>Please download Specifications sheet to see figures</strong><br />1. Remove the factory foot from the lens. Use the enclosed hex key to remove all four small mounting screws on the underside of the lens foot (Fig. 1).<br />2. Attach the AP-55
• Overview
  5 plate to the lens using the four enclosed M3 x 12mm screws (Fig. 2).<br />3. Drive the screw in until you first meet resistance, then turn it about 30&deg; farther to establish appropriate, but not excessive, torque. Do not over tighten; it is poss
• Overview
  ible to shear the head off the fastener with the hex key included.<br />4. Install safety stop screws as shown on page 2 (Fig. 3). Safety stop screws are not required, however they keep your lens and camera secure when using a compatible QR clamp&nbs
• Overview
  p;(see note on page 2).

Type